Forklift Assembler

The Assembler will perform a variety of operations and subassembly as needed to complete the manufacturing of forklifts and material handling products that conform to quality specifications and production goals.   Essential Duties:       Identify & retrieve parts necessary for assembly.          Responsible for assembly, sub assembly and modification of parts to build material handling equipment.         Receive and understand detailed instructions concerning the assembling of parts. Such instruction may be conveyed verbally, through a job card, blue print, pick list, process sheet and by other means either verbal or written or other.          Inspect forklifts, carts, burden carriers or various material handling equipment to ensure appropriate installation and operation of assigned stations. Responsible to correct or repair.          Duties will include assembling, troubleshooting, and inspection, testing, and safely operating a forklift.         Assemble parts onto the frame of the material handling equipment, forklift, cart or burden carrier; such as batteries, windshields, steer cylinder, oil filter, motor, steer axles, brakes, seats, counterweights, brackets, Cal plates, side panels, uprights, wheels, overhead guards, and LBR’s. Also wire control panels, set diagnostic gauge, and fill sump tanks.          Build position and install subassemblies onto frame. Subassemblies include but are not limited to brakes, drive unit, steering, pump motors, power steering, handles, plates, harnesses, battery cables and receptacle ends. Requires concentrated effort on small details and the use of hand tools to perform wiring and assembly tasks. Use other equipment to assemble parts including power and air tools, torque wrench, air gun, clamp, hoists etc.          Fill truck with required fluids.         Must perform all duties within production schedule and in accordance with engineering, quality and production standards.         Must perform all duties with minimal defects, errors and in a safe manner.         Must be able to maintain 5s sustainment     Basic Qualifications       High school education or equivalent          Good mechanical aptitude is a must.         Must be able to lift up to 50 lbs of assembly components, with the ability to maneuver a lifting device for components over 50 pounds (i.e. tires) up to 100 times per day.         Must be able to torque up to 500 lbs of pressure using manual and or electric torque wrench required upper and extremity strength.          Reach around into and under areas of truck to adjust, assemble bolts & components etc.          Assemble of components require repetitive twisting motion of wrist and lower arm.          Position could require working overtime         Must be authorized to work indefinitely in the US     Physical / Environmental Conditions:  The position is exposed to the typical factory environment which is described as follows:  May encounter loud noise, varying temperatures (including heat during summer and from the  Operation of equipment. Various machinery and equipment may generate loud noise and  Vibration. The incumbent may come into contact with oil, grease, paint, solvents and other potentially hazardous materials. The incumbent may also encounter dust, fumes, flying debris, and fast moving machinery, such as forklift trucks.      This position description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, efforts, or working conditions associated with the job; it is intended to be an accurate reflection of those principal job elements essential to the job. Incumbents may be required to perform other duties as assigned or as required by the needs of the business. CLARK Material Handling Company retains the discretion to add to or change the duties of the position at any time.

Salary : $0