Demo

TOOLS AND PARTS ATTENDANT

US Army National Guard Units
Castle, DE Full Time
POSTED ON 5/9/2024 CLOSED ON 7/7/2024

What are the responsibilities and job description for the TOOLS AND PARTS ATTENDANT position at US Army National Guard Units?

Duties



1) Identifies user's tools, parts, equipment, and requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or because they are frequently out for repair. Recommends possible substitute or interchangeable items. Sets up and maintains storage locations. Determines methods of storage, identification, and stock location, considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued.

(2) Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for repair, issue, and turn-in records maintained in the tools and parts room. Compiles reports of use of stock handling equipment, adjustments of inventory counts and stock records, spoilage of or damage to stock, location changes, and refusal of shipments.

(3) Ensures that tools and equipment are maintained in good condition by performing visual and operating checks, taking measurements with such devices as calipers, and receiving reports from users on the nature and extent of damage to tools and equipment. May make minor repairs to tools and equipment, determine when damaged and inoperative items are too costly to repair, and report damaged or worn-out equipment to superiors.

(4) Determines stock replenishment levels for centrally controlled supplies and other material within funding limitations. Assures that supplies and monies are not wasted through excess accumulation, and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment.

(5) Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations, and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available.

(6) Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests desiring additional identification data, verification, or comparison of data on hand with reference sources. Searches for stock number, prices, descriptions, sources of supply, or other management data. When unknown, trace's part number or type number and manufacturer of the item of equipment.

(7) Edits supply transactions or provides customer service for urgent critical shortage items and other items requiring special handling when established procedures are not applicable. Codes and classifies requisitions, shipping orders, and other documents, and extracts requests to other sources of supply or refers them to an inventory control point when stock is unavailable or cannot be shipped.

(8) May assist a Surface Maintenance Mechanic by performing the less complex and more routine helper type duties. May perform maintenance tasks with repairers or mechanics by assisting in the accomplishment of duties. This may involve getting tools and supplies, carrying materials, and lifting and holding materials in place during operations. As directed by the repairer or mechanic, uses hand and powered tools of the trade to assist in the disassembly, assembly, and installation of simple component parts and units. Applies knowledge gained from previous work assignments. Detailed instructions are received from the higher graded Surface Maintenance Mechanic with each new assignment. Work is reviewed by the higher-level employee while in progress and upon completion. Cleans tools, parts, and equipment and keeps work areas clean and orderly.

(9) Performs other duties as assigned.

Requirements

Conditions of Employment

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • Must be able to pass an operator's test for forklift equipment up to 10,000 lbs. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
  • Must have 9 months of specialized experience
  • Must meet the definition of specialized experience by the closing date of the announcement.
  • Must meet rank requirement and be eligible for military membership within the Delaware Army National Guard by the closing date of this advertisement.

Qualifications

Military Grades: E-1/PV1 - E-6/SSG

Compatible Military Assignments: Must meet rank requirement and be eligible for military membership within the Delaware Army National Guard by the closing date of this advertisement.

SPECIALIZED EXPERIENCE: Must have 9 months of Experience or training in verifying stock by opening, counting, and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape, and weight of items. Experience in completing stock records by showing the names, quantities, and location of stock. Experience in identifying correct nomenclature and stock number of items to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools.

Military Requirements: Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS. Specific requirements are found in: references listed below, NGB Compatibility tables and your local Personnel section.

Quality of Experience: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

Must be able to pass an operator's test for forklift equipment up to 10,000 lbs. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Education

There are no substitutions of education for specialized experience at WG-06

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).


  • Benefits

    A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

    Review our benefits

    Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

  • Benefits

    A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

    Review our benefits

    Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

  • Required Documents

    As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.

    To apply for this position, you must submit a complete Application Package which includes:

    1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

    2. Other supporting documents: DNG 51-R and any other supporting documents for qualification.

    If you are relying on your education to meet qualification requirements:

    Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

    Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

  • How to Apply

    To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12405267

    A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

    To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

    Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

    After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

    You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.


    To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

    Agency contact information

    Saidi Abdallah

    Phone

    302-326-7807

    Email

    saidi.abdallah.civ@mail.mil

    Address

    DE Combined Support Maintenance Shop
    1197 River Road
    New Castle, DE 19720
    US

    Next steps

    Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

  • Fair and Transparent

    The Federal hiring process is set up to be fair and transparent. Please read the following guidance.

    • Equal Employment Opportunity (EEO) Policy
    • Reasonable accommodation policy
    • Financial suitability
    • Selective Service
    • New employee probationary period
    • Signature and false statements
    • Privacy Act
    • Social security number request

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

2. Other supporting documents: DNG 51-R and any other supporting documents for qualification.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.


Help

This job is open to

  • Federal employees - Excepted service

    Current excepted service federal employees.

  • National Guard & reserves

    Current members, those who want to join or transitioning military members.

  • The public

    U.S. Citizens, Nationals or those who owe allegiance to the U.S.

Clarification from the agency

AREA 1 = Permanent & Indefinite On-Board Title 32 Employees AREA 2 = Delaware National Guard On-Board Title 5 Employees with Military Membership in the Delaware National Guard AREA 3 = Current Temporary Title 32 Employees, Traditional Military Members (M-Day & DSG), & AGR Members AREA 4 = All others eligible for military membership in the Delaware National Guard

Retail Sales Manager
Harbor Freight Tools USA, Inc. -
Pennsville, NJ
Commercial Parts Pro
Advance Auto Parts -
Delmar, DE
Retail Parts Pro
Advance Auto Parts -
Milford, DE

If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution. Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right. Surveys & Data Sets

What is the career path for a TOOLS AND PARTS ATTENDANT?

Sign up to receive alerts about other jobs on the TOOLS AND PARTS ATTENDANT career path by checking the boxes next to the positions that interest you.
Income Estimation: 
$46,024 - $59,266
Income Estimation: 
$63,224 - $83,090
Income Estimation: 
$72,663 - $96,851
Income Estimation: 
$58,160 - $72,082
Income Estimation: 
$53,290 - $69,188
Income Estimation: 
$61,853 - $80,766

Sign up to receive alerts about other jobs with skills like those required for the TOOLS AND PARTS ATTENDANT.

Click the checkbox next to the jobs that you are interested in.

  • Customer Service Skill

    • Income Estimation: $28,742 - $52,194
    • Income Estimation: $33,703 - $56,095
  • Expediting Skill

    • Income Estimation: $44,447 - $57,713
    • Income Estimation: $46,865 - $59,609
This job has expired.
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles Skills Library

Not the job you're looking for? Here are some other TOOLS AND PARTS ATTENDANT jobs in the Castle, DE area that may be a better fit.

Construction Technology Sales Representative

Benchmark Tools & Supply Inc, Wilmington, DE

AI Assistant is available now!

Feel free to start your new journey!